Dry Block Heater Techne Digital DB-2D Ambient - 100°C Dry Block Heaters - FDB02DD

requires 2 lnsert blocks

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.

• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard


DB-2D and DB-2DH

• Bright orange LED digital display for fast and accurate setting of temperature
• RS232 connection available for PC control
• Can hold up to 2 aluminium insert blocks or one 96-well plate block
• Temperature range from ambient to 100°C or 200°C
• Fast heat-up rate 30°C to 100°C from just 12 minutes
• Temperature stability at 40°C of less than ± 0.1°C

Technical Specification

Temperature range Ambient to 100°C
Maximum no. of blocks 2
Temperature stability @40°C ±0.05°C
Temperature stability @ 100°C ±0.1°C
Temperature setting Push Button
Temperature scale graduation No graduation
Temperature display Orange 4 digit LED
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±2°C
Heat up time: 30 to 37°C 8
Heat up time: 30 to 56°C 9
Heat up time: 30 to Maximum 12
RS232 option available Yes
Heater power 300W
Power supply 230V 50-60 Hz
Dimensions L x W x H (mm) 202 x 260 x 105
Shipping Weight 5kg

Growth Chamber

Climate/stability Cahmaber And Plant Growth Chamber

· Chamber (stability & hygro-thermometric tests.)

· The ICH tests are proceed on drugs and active principals in order to test their stability in long term and their ageing resistance before their launch on the market

· Temperature range 0°C to 60°C

· Relative humidity controls from 5 to 95% RH

· Volume (90-1200ltr)

· Double auto tune electronic PID controller

· Dual digital display, real and set point

· Pt 100 Ohms probe controls

· RH by capacitive sensor

· Ultrasonic humidity generator

More Details:

Jhon Simanjuntak

0818798390

Hibridisation Oven

Jhon Simanjuntak
0818798390

Compact design
Rotisserie and rocker in one unit
Up and over door for accessibility
Accurate temperature control
Advanced safety features
Variable speed control

A very versatile 20 litre hybridisation incubator and combined rocker shaker which only requires a minimum of bench space. The incubator temperature is accurately set via the easy to use encoder controls and displayed by a bright LED. Forced air circulation combined with microprocessor control means outstanding temperature uniformity.

The `safety first' design includes an over-temperature protection system that automatically tracks the set temperature and controls the heater in the event of a fault. The smart system displays error codes indicating a fault has occurred or if the set temperature has been interrupted. The incubator also cuts power to the motor if it overheats or stalls.
The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over' door mechanism gives excellent access to the incubator.

Conversion of the unit to a rocker shaker is fast and easy. Simply remove the rotisserie and pull forward the platform located at the rear of the incubator. The gentle rocking action is ideal for the washing stage of most hybridisation procedures. Rocking speed is fully variable allowing optimisation depending on application. A range of hybridisation bottles are available made from tough Pyrex® glass and leak proof PTFE faced screwcaps

Nominal capacity	20 litres
Temperature range	Ambient + 8°C to 80°C
Temperature fluctuation (at 37°C)	±0.5°C
Temperature variation	±0.5°C
Display type	LED
Display resolution	0.1°C
Rotational speed range	2 to 10rpm
Rocker speed range	5 to 70 oscillations / minute
Internal dimensions (w x d x h)	250 x 230 x 200mm
Overall dimensions (w x d x h)	380 x 380 x 435mm
Net weight	24kg
Electrical supply	230V, 50Hz, 350W

Picture:

Hybridisation bottles

Bottle hybridisation minimises probe volumes, reduces reagent volumes and enhances signal intensity.

Made from Pyrex® borosilicate glass Stuart hybridisation bottles are robust and can easily withstand the temperatures of the most rigorous hybridisation techniques. The thermoplastic polyester caps are very rigid and will not distort during repeated heating in the incubator which can lead to leakage. The seal is made by a PTFE faced insert that covers the entire inside of the cap making very good contact with the glass thread.

Available in three sizes, each bottle comes complete with cap and a care leaflet.

Model	Overall length	O.D	I.D	Wall thickness
SI20H/3	260mm	40mm	33.6mm	3.2mm
SI20H/4	260mm	75mm	68.6mm	3.2mm
SI20H/5	170mm	40mm	33.6mm	3.2mm

Model	Description
SI30H	Hybridisation incubator / shaker supplied with 1 x rotisserie
SI20H/1	Spare rotisserie for 7 x 40mm diameter bottles (holds 6 plus 1 in the centre)
SI20H/2	Accessory rotisserie for 2 x 75mm diameter bottles